2999k金沙贵宾会「主页」·欢迎您

<p id="cu14f"><form id="cu14f"></form></p>

  • <center id="cu14f"></center>

      <acronym id="cu14f"></acronym>
      <p id="cu14f"><label id="cu14f"><xmp id="cu14f"></xmp></label></p>
      首页 ->产品展示 >> JLD型蝶阀试验机

      JLD型蝶阀试验机

      JLD型蝶阀试验机

      详细说明

      口径规格 :
      DN50~2400,NPS2''~96''
      压力范围 :
      PN1.6~48Mpa,Class150~2500lb
      机体材料 :
      Q325A
      阀门类型 :
      蝶阀、平板闸阀、刀型闸阀
      驱动操作 :
      液压驱动、PLC电脑控制、按钮控制
      连接方式 :
      法兰式、对夹式
      荣获证书 :
      新产品、国家专利等

      JLD型液压蝶阀试验机、试压台描述:

      JLD型蝶阀试验机是公司自主研发拥有自主知识产权的专利产品专利号:ZL2014 2 0194312.6本机适用于蝶阀性能试验的检测设备。本机集机、电、液和液动供压装置循环水系统于一体,工作台夹紧爪采用油缸直接驱动夹紧蝶阀来实现测试,使各爪受力均匀,夹紧可靠、夹紧爪的径向移动功能采用油缸、连杆组成,实现各爪径向同步移动,保证了各大小不同通径的蝶阀测试,测试密封时,如有带法兰的蝶阀夹紧法兰、无法兰的蝶阀由液压夹爪直接伸延夹住蝶阀平面即可测试。该机能直观蝶阀内腔有否泄漏或冒气泡,如试强度时加盖上密封盲板即可,在该机上可做阀门电动装置力矩及 90度开闭测试。该机随带液压供水泵、介质可循环储藏使用。使用清水时,必须加防锈剂,以免使阀门试后生锈及影响液动供压装置正常的使用功能。
       

       
         1.  蝶阀测试台技术性能与特点

       

       

      ● 专用于法兰式与对夹式蝶阀的强度与密封性能试验和阀瓣启闭与电动装置扭力试验,
          完全符合GB/T 13927-2008、JB/T 9092-99、API 598要求;
      ● 采用同步抱压夹紧(分单式和组合套式);
      ● 系统内配置高压水泵和大流量低压水泵供压装置,试验介质循环贮存使用;
      ● 试压介质为水、气、煤油,由用户任意选择;
      ● 在测试水或气的保压过程中,被试阀腔内有较高的压力情况下按任何一个按钮都不工作,
          一直泄压到无压力才能正常工作。(工作时确保安全);
      ● 本机设有液压自动卸荷系统,使用时,高压状态与卸荷状态自动切换,有效降低了油温,
         延长了设备使用寿命,节能降耗;
      ● 设有试压安全保护装置;
      ● 可订配电脑检测数据管理系统。
      Technical performance and feature
      ● It is suitable to have a shell test and closure test for flanged end butterfly valves and wafer type of
         valves and valve flap start and close and electric device twisting force test, fully meet the
          GB/T 13927-2008, JB/T 9092-99, the API 598 requirements.
      ● It adopts the synchronism pressure hold clamp (divide into single type and combination set type).
      ● The system equips with the high pressure water pump and large flow low pressure water pump
         devices to be used for the test medium circulation storage.
      ● The pressure trial medium is water, air and kerosene that can be selected freely by users.
      ● During the course of presseure protection of water or air test, any button can not work under the
         condition of which the tested valve cavity has high pressure, it can work nornmally until leaking the
          pressure to no pressure (make sure safety while working).
      ● The test bench is equipped with an automatic oil pressure discharge system. As it is used,
         a high pressure condition and pressure discharge condition can be changed over to effectively
          reduce the oil temperature, elongate life of the test bench and save energy.
      ● It sets the pressure trial safe protective device.
      ● It can match with computer detection data management system.
       
      2.示意图
      2.1 JLD型 (蝶阀)液压阀门测试台(外观示意图)套式
           JLD type butterfly valve hydraulic valve test bench (outline schematic figure) double head
       
      1. 液压控制柜        2. 压力表         3. 数码时钟         4. 操作按钮板        5. 右水气路开关      6. 右夹紧爪
       
      7. 右夹紧活塞杆   8. 右向工作台9. 左水气路开关10. 左夹紧爪           11. 左夹紧活塞杆    12. 左向工作台
       
      2.2   JLD型 (蝶阀)液压阀门测试台(外观示意图)单式
              JLD type butterfly valve hydraulic valve test bench (outline schematic figure) single head
      1. 液压控制柜  2. 数码时钟  3. 压力表      4. 操作按钮板  5. 夹紧爪
      6. 夹紧活塞杆  7. 工作台      8. 高压水泵 9. 低压水泵
       
      3.  蝶阀试验台压力范围图表:
      3.1 JLD-300型 阀门公称通径与公称压力试验范围
            The test range of valve nominal diameter and nominal pressure for JLD-300 model
      3.2   JLD-400型 阀门公称通径与公称压力试验范围
              The test range of valve nominal diameter and nominal pressure for JLD-400 model
      3.3   JLD-500型 阀门公称通径与公称压力试验范围
              The test range of valve nominal diameter and nominal pressure for JLD-500 model
      3.4  JLD-600型 阀门公称通径与公称压力试验范围
              The test range of valve nominal diameter and nominal pressure for JLD-600 model
      3.5   JLD-800型 阀门公称通径与公称压力试验范围
              The test range of valve nominal diameter and nominal pressure for JLD-800 model
      3.6   JLD-1000型 阀门公称通径与公称压力试验范围
              The test range of valve nominal diameter and nominal pressure for JLD-1000 model
       
      3.7   JLD-1200型 阀门公称通径与公称压力试验范围
              The test range of valve nominal diameter and nominal pressure for JLD-1200 model
      3.8  JLD-1400型 阀门公称通径与公称压力试验范围
              The test range of valve nominal diameter and nominal pressure for JLD-1400 model
      3.9   JLD-1600型 阀门公称通径与公称压力试验范围
              The test range of valve nominal diameter and nominal pressure for JLD-1600 model
      3.10   JLD-2000型 阀门公称通径与公称压力试验范围
              The test range of valve nominal diameter and nominal pressure for JLD-2000 model

      其它系列阀门试压检测设备链接:JWT型顶压阀门试压机    JLT型立式顶压阀门试验机     JWZ型液压阀门测试台 

                                                                       JWTQ锻钢阀门试压机   JLD蝶阀试验台

       

      查看更多[ 产品展示 ]产品

      友情链接不锈钢离心泵阀门试压机阀门试验机阀门试验台
      版权所有 © 2011 浙江优机机械科技有限公司 All Rights Reserved.
      电话:0577-21816666 67953666 传真:0577-67996922 网站地图
      2999k金沙贵宾会